Readily biodegradable separating agent for non-absorbing moulds based on vegetable oil
- leads to a uniform bright concrete surface (architectural concrete quality)
- the mould is covered with a water-repellent anti-rust film
- excellent adhesion to horizontal and vertical moulds
Working temperature: >0 °C
Tested according to OECD 301 F and classified as readily biodegradable
Article number220260
Last update03/12
Handling HintsBIOtrenn Emulsion NSG is ready to use and may not be mixed with other products. The separating agent is applied thinly and uniformly (in lanes) to a dry and clean mould.
During application of the separating agent small white droplets form on the mould. Do not wipe! Wait until no more white droplets are left and a continuous film is formed before filling in the concrete.
Formliquid
Consumption15 - 30 ml/m²
StorageProtect against frost and dirt. Under normal storage conditions (closed container, 20 °C) minimum shelf-life 6 months. If stored >2 months, the product has to be stirred prior to use. The storage temperature may not exceed 35 °C.
Packagingcontainer approx. 1000 l, drum approx. 210 l, can approx. 20 l
exact quantity delivered on request « back
exact quantity delivered on request « back
Applicationsfor all types of moulds for heated moulds up to 60 °C Colorwhite Density0.98 ± 0.02 g/ml InspectionVegetable oils can severely influence the resistance of certain rubber gaskets. To be sure we recommend testing the compatibility of those parts getting in contact with BIOtrenn Emulsion NSG prior to application.
