Special separating agent for non-absorbing moulds
- separating agent for non-absorbing, large-size moulds (+60 °C)
- does not form pores
- for sharp edges and profiles
Article number223450
Last update11/09
Handling HintsThe non-diluted BIOtrenn–Super is applied as thin and even as possible to the mould with a brush, sponge or spray system.
The moulds should be dry and clean in order to obtain the full effect of the thin layer.
Formliquid
Consumption15 - 30 g/m² for steel moulds
20 - 40 g/m² for plastic moulds StorageProtect against frost and dirt. Under normal storage conditions (closed container, 20 °C) minimum shelf-life 12 months. Packagingcontainer approx. 1000 l, drum approx. 210 l, can approx. 20 l
exact quantity delivered on request « back
20 - 40 g/m² for plastic moulds StorageProtect against frost and dirt. Under normal storage conditions (closed container, 20 °C) minimum shelf-life 12 months. Packagingcontainer approx. 1000 l, drum approx. 210 l, can approx. 20 l
exact quantity delivered on request « back
Applicationsfor heated moulds up to 60 °C
for solvent resistant plastic moulds Coloryellow Density0.82 ± 0.02 g/ml
for solvent resistant plastic moulds Coloryellow Density0.82 ± 0.02 g/ml
