Separating agent for non-absorbing moulds
- mineral oil-free
- corrosion inhibiting and preserving
Article number222050
Last update11/09
Handling HintsECOtrenn (N) is applied with a spray system (wide jet) to the mould in a very thin layer. The mould should be dry and clean to obtain the full effect of the thin layer.
The product is delivered ready for application and may not be diluted.
Formliquid
Consumption10 - 25 g/m² , depending on the type and absorbency of the mould
StorageProtect against frost and dirt. Under normal storage conditions (closed container, 20 °C) minimum shelf-life 12 months.
Packagingcontainer approx. 1000 l, drum approx. 210 l, can approx. 20 l
exact quantity delivered on request « back
exact quantity delivered on request « back
Applicationsfor all types of moulds for heated moulds up to 60 °C Coloramber Density0.87 ± 0.02 g/ml
