2-component sealing with high mechanical and chemical resistance
The surface must be load-bearing, dry (residual moisture <5 % CM-method), clean and free of grease and oil.
Article number250512
Last update11/10
Handling HintsREBAtex AC Rapid is applied uniformly with an appropriate spray system. Both components are mixed directly at the spray nozzle.
REBAtex AC Rapid can be applied again after approx. 5 min. (approx. 40 °C hot air) and is block-hard after approx. 30 min.
FormComp. A: liquid; Comp. B: liquid
The specified quantities are approximate values because the actual applied quantity does not only depend on the surface structure, but also on the absorbency of the surface.
ConsumptionSealing: approx. 200 g/m²
StorageProtect against frost and dirt. Under normal storage conditions (closed container, 20 °C) minimum shelf-life 6 months. Prior to use, stirr comp. A well. Protect comp. B against air humidity.
PackagingComp. A: drum approx. 180 kg
Comp. B: bucket approx. 18 kg « back
Comp. B: bucket approx. 18 kg « back
Applicationscement-bonded surfaces
high-quality concrete products ColorComp. A: yellowish; Comp. B: colourless DensityComp. A: 0.97 ± 0.02 g/ml; Comp. B: 1.07 ± 0.02 g/ml InspectionSuitable prelliminary tests are required! During application and hardening the object temperature should at least be +8 °C.
high-quality concrete products ColorComp. A: yellowish; Comp. B: colourless DensityComp. A: 0.97 ± 0.02 g/ml; Comp. B: 1.07 ± 0.02 g/ml InspectionSuitable prelliminary tests are required! During application and hardening the object temperature should at least be +8 °C.
