Impregnation for application in the circulation process
- quick-drying
- solvent-free
- dirt-repelling effect
All tools have to be cleaned with water immediately upon use. Avoid exposure to the sun during application. After approx. 30 sec. the impregnated concrete parts are non-adhesive and can be stacked and/or palletized. The total drying time is approx. 20 min. at 20 °C.
Article number250250
Last update11/09
Handling HintsThe surface has to be consistent, clean and absorbent. Matt-humid surfaces are suitable as well. REBAtex BI is smoothly applied to the surface to be treated with a brush. In case of several applications REBAtex BI has to be applied wet-on-wet.
For permanent impregnation during the concrete production process we recommend application by spraying (e. g. BPB–EASY-SPRAY system).
Formliquid
The specified quantities are approximate values because the actual applied quantity does not only depend on the surface structure, but also on the absorbency of the surface.
Consumption100 - 300 g/m²
StorageProtect against frost and dirt. Under normal storage conditions (closed container, 20 °C) minimum shelf-life 12 months.
Packagingcontainer approx. 1000 kg, drum approx. 210 kg, can approx. 20 kg
exact quantity delivered on request « back
exact quantity delivered on request « back
Applicationsmineral surfaces
for all types of refined surfaces Colorcolourless, opaque Density1.05 ± 0.02 g/ml InspectionPreliminary tests on varnished and non-absorbing surfaces have to be conducted before application.
for all types of refined surfaces Colorcolourless, opaque Density1.05 ± 0.02 g/ml InspectionPreliminary tests on varnished and non-absorbing surfaces have to be conducted before application.
